Cisco Systems CP7921GAK9RF manual Obtaining Headsets, Using AutoAnswer

Using a Handset, Headset, and Speakerphone

Obtaining Headsets

Your phone supports wired headset jack types with a 2.5 mm, 3-band/ 4 connector. For information about purchasing headsets, see Headset Information, page 14.

Using AutoAnswer

You might use AutoAnswer if you receive a high volume of incoming calls or handle calls on behalf of others. Your system administrator configures AutoAnswer to work with either your speaker mode or headset.

If you...	Then...
Use AutoAnswer with a	Keep headset mode active by ensuring the headset is plugged into the
headset	phone, even when not on a call.
	If your phone is set up to use AutoAnswer in headset mode, calls are
	answered automatically only if the wired headset	icon is in the
	phone status line. Otherwise, calls ring normally and you must
	manually answer them.
Use AutoAnswer with the	Keep the handset in the desktop charger cradle, so the speaker is active.
desktop charger speaker	If your phone is set up to use AutoAnswer in speaker mode, calls are
	answered automatically using the desktop charger speaker.
	Note You cannot turn off the desktop charger speaker. You must remove
	the phone from the cradle to disable the desktop charger speaker.

Cisco Unified Wireless IP Phone 7921G Phone Guide for Cisco Unified Communications Manager 7.0 67