Using a Handset, Headset, and Speakerphone
Cisco Unified Wireless IP Phone 7921G Phone Guide for Cisco Unified Communications Manager 7.0 65
Using a Handset, Headset, and Speakerphone
You can use your phone as a mobile handset, a speakerphone, with a headset, or with the
speakerphone in the desktop charger.
If you want to... Then...
Use the handset Press ; to hang up, press .
Use a wired headset Plug the headset connector into the headset port. The icon
displays on the phone status line. Place and answer calls as usual.
If you use AutoAnswer, see Using AutoAnswer, page 67 for
exceptions.
You can use the headset with all the controls on your phone,
including and .
The headset audio remains active when the headset is connected to
the phone.
Use the speaker mode Press and hold until the icon displays.
Note You can activate the speakerphone before making a call or
during a call. The speaker mode remains active for future calls
until toggled off.
Note You can activate the speakerphone (on the phone) even when the
phone is docked in the desktop charger and connected to a wired
headset.
Switch to the speaker (from
the handset) during a call
Press and hold until the icon displays.
Press and hold to toggle back to the handset.