Cisco Systems CP7921GAK9RF manual Access Lists for Mobile Connect, Answer a call using your

Tips

•EM automatically logs you out after a certain amount of time. You system administrator establishes this time limit.

•Changes that you make to your EM profile (from the User Options web pages) take effect the next time that you log in to EM on a phone.

•Settings that are controlled on the phone only are not maintained in your EM profile.

Managing Business Calls Using a Single Phone Number

With Mobile Connect and Mobile Voice Access installed, you can use your mobile phone to handle calls associated with your wireless IP phone number.

.

If you want to...	Then...
Configure Mobile Connect	Use the User Options web pages to set up remote destinations and
	create access lists to allow or block calls from specific phone numbers
	from being passed to the remote destinations. See Setting Up Phones
	and Access Lists for Mobile Connect, page 97.
Answer a call using your	See Answering a Call, page 36.
mobile phone
Switch an in-progress call	See Switching an In-Progress Call to Another Phone, page 39.
between your wireless IP
phone and mobile phone
Put a call that has been	1.	Press the Enterprise Hold (name may vary) softkey.
picked up on a mobile		The other party is placed on hold.
phone on hold
	2.	On your mobile phone, press the Resume softkey (name may vary).
		See Switching an In-Progress Call to Another Phone, page 39.
Connect to Mobile Voice	1.	From any phone, dial your assigned Mobile Voice Access number.
Access	2.	Enter the number you are calling from, if prompted, and your PIN.
Turn on Mobile Connect	1.	Dial your assigned Mobile Voice access number.
from your mobile phone	2.	Enter your mobile phone number (if requested) and PIN.
	3.	Press 2 to enable Mobile Connect.
	4.	Choose whether to turn Mobile Connect on for all configured
		phones or just one:
		– All phones—Enter 2.
		– One phone—Enter 1 and enter the number you want to add as
		a remote destination, followed by #.
62		OL-16131-01