Cisco Systems OL-27407-01 manual Installing Cisco 890 Series in a Rack, Screws

Chapter 2 Installing the Router

Installing the Cisco 860, 880, 890 ISR

Installing Cisco 890 Series in a Rack

The Cisco 890 series ISRs can be mounted in a rack.

To install a Cisco 890 series ISR in a rack, follow these steps:

Step 1 Remove the screws, as shown in Figure 2-43.

Figure 2-43 Screw Locations

1

1

1

1 Screws

371427

Step 2 Using the screws provided, attach the rack-mount brackets to the Cisco 890 series ISR chassis, as shown in Figure 2-44. Use two screws on each side. Use a number 2 Phillips screwdriver to install the bracket screws on both sides of the chassis.

Caution Do not over torque the screws. The recommended torque is 6 to 8 in-lb (0.7 to 0.9 N-m).

	Cisco Integrated Services Router Hardware Installation Guide
2-52	OL-27407-01