Cisco Systems OL-27407-01 manual C881G-B/S/V-K9 ISRs, C881GW-S/V-A-K9 ISRs

Chapter 1 Product Overview

Cisco 860, 880, 890 Series

Figure 1-31shows the back panel details of the C881WD-A-K9 and C881WD-E-K9 ISRs.

Figure 1-31 Back Panel of the C881WD-A-K9 and C881WD-E-K9 ISRs

							9
			Cisco 881WD				O
FE WAN				FE LAN		CONSOLE
							POE OPTION
							REQUIRES 5A
							POWER
							ADAPTOR	RESET
4	0
		3	2	1	0	AUX			12VDC	5A
1	2			3		4	5	6	7	8

284987

1	Primary WAN port—10/100 FE	6	Reset button
2	USB port	7	Power connector
3	4-port 10/100 Ethernet switch	8	Kensington security slot
4	Serial port—console or auxiliary	9	Power switch
5	Note No separate PoE power supply is
	required for routers with embedded
	WLAN antennas. For information on
	system power supply requirements
	when PoE is enabled, see the “Power
	over Ethernet Module” section on
	page 1-88.

C881G-B/S/V-K9 ISRs

The C881G-B-K9, C881G-S-K9, and C881G-V-K9 ISRs are members of the Cisco 880 series data routers. These routers provide integrated Virtual Private Network (VPN), 802.11b/g/n-compliant wireless Access Point (AP), 3G, and backup capabilities.

For information on configuring Cisco 880 Series ISRs, see Cisco 880 Series Integrated Services Router Software Configuration Guide.

C881GW-S/V-A-K9 ISRs

The C881GW-S-A-K9 and C881GW-V-A-K9 ISRs are members of the Cisco 880G series data routers. These routers provide integrated VPN, embedded Wi-Fi CERTIFIED™, 802.11b/g/n-compliant wireless AP, 3G, and backup capabilities.

For information on configuring Cisco 880 Series ISRs, see Cisco 880 Series Integrated Services Router Software Configuration Guide.

	Cisco Integrated Services Router Hardware Installation Guide
1-54	OL-27407-01