Cisco Systems OL-27407-01 manual Installing the Cisco 819 ISR

Chapter 2 Installing the Router

Installing the Cisco 810 ISR

Figure 2-17 Connecting the Ring Lug onto the Grounding Point

302791

1 2

1

2

6-32 ground screw

Ground wire

Step 7 Connect the ring lug to the router grounding point and reinstall the same 6-32 screw.

Installing the Cisco 819 ISR

This section describes the equipment and the procedures for successfully installing the Cisco 819 ISR and contains the following sections:

•Equipment, Tools, and Connections, page 2-20

•Installing the Router, page 2-22

•Mounting the DC Power Supply, page 2-37

Note For compliance and safety information, see the Regulatory Compliance and Safety Information Roadmap that ships with the router and the Regulatory Compliance and Safety Information for Cisco 800 Series Routers.

Warning Read the installation instructions before connecting the system to the power source. Statement 1004

	Cisco Integrated Services Router Hardware Installation Guide
OL-27407-01		2-19