Cisco Systems OL-27407-01 manual Antenna, LEDs

Chapter 1 Product Overview

Cisco 810 Series

•Ceiling and Wall Mounting Option

•LED indicators for the platform

Antenna

The Cisco 812 ISR supports 3G external antenna and WiFi embedded antenna.

3G External Antenna

The Cisco 812 ISR provides two standard panel-mount TNC connectors to support 3G. The main antenna is used for the primary 3G antenna. The second can be used as a diversity receive only 3G antenna or an amplified GPS antenna. See Figure 1-2for the location of the antennas.

WiFi Embedded Antenna

The Cisco 812 ISR supports Dual ports WiFi radios (802.11 a/b/g/n) with embedded 2x3 MIMO.

For compliance and safety information, see the Regulatory Compliance and Safety Information for the Cisco 800 Series and SOHO Series Routers.

LEDs

The Cisco 812 ISR has two LEDs located on the top side of the router. The 3G LED is located on the lower right side with respect to the Cisco logo. 3G LED supports multiple functions and colors. The WiFi LED is located on lower left side with respect to the Cisco logo. Table 1-1describes the 3G LED for the Cisco 812 ISR.

Table 1-1	Cisco 812 3G LED Descriptions
ROMMON Mode
3G LED		LED Color	Description
System		Yellow	FPGA download is complete.
		Green (four blinks)	ROMMON is running.
		Off	No power.
			Incomplete FPGA download.
IOS 3G Mode
3G Service Type		White	MC8700—2G (GPRS/EDGE)
			MC5728—1xRTT
		Green	MC8700—3G (UMTS)
			MC5728—EVDO Rev 0
		Light Blue	MC8700—3.5G (HSPA)
			MC5728—EVDO Rev A
		Blue	MC8700—3.7G (HSPA+)
			MC5728—N/A
		Off (solid)	No service.

Cisco Integrated Services Router Hardware Installation Guide

OL-27407-01 1-5