Cisco Systems OL-27407-01 Mean Time Between Failure Ground Benign Environment, SKUs Mtbf hours

Appendix A Technical Specifications

Cisco 810 Series

Mean Time Between Failure Ground Benign Environment

Table A-2lists the Mean Time Between Failure (MTBF) values for Cisco 812 ISRs. The MTBF is calculated based on the Ground Benign condition. The values may be adjusted based on the different router usage.

Table A-2	MTBF Values
SKUs		MTBF (hours)
C812G-CIFI-V-A-K9		210,000
C812G-CIFI-S-A-K9
C812G-CIFI+7-E-K9		280,000
C812G-CIFI+7-N-K9
C812G+7-K9		340,000

Cisco 819 Series

This section provides router, port, cabling specifications, and power adapters for the Cisco 812 ISRs and contains the following topics:

•Router Specifications, page A-4

•Mean Time Between Failure Ground Benign Environment, page A-8

•Supported Power Adapters, page A-9

Warning Ultimate disposal of this product should be handled according to all national laws and regulations.

Statement 1040

Note For compliance and safety information, see the Regulatory Compliance and Safety Information Roadmap that was shipped with the router and Regulatory Compliance and Safety Information for Cisco 800 Series Routers.

Router Specifications

Table A-1lists the operational limits of the Cisco 819 ISR. Operating the router outside of the limits specified is not supported. For the complete list of SKUs available for each Cisco 819 ISRs, see the “SKU Information” section on page 1-14.

Cisco Integrated Services Router Hardware Installation Guide

A-4 OL-27407-01