Cisco Systems OL-27407-01 manual

Chapter 1 Product Overview

Cisco C891 Series ISRs

Step 2 Press and hold the Reset button until the system status LED begins to flash. Typically, this occurs within 5 seconds.

The router reloads itself after the startup configuration has been replaced with the new customer configuration.

Custom Configuration File for Cisco 892FSP, 896VA, 897VA, and Cisco 898EA

For the first method, the configuration file can be located on the router's compact flash or on the router's nvram. The custom configuration file must use cfg as the filename extension.

When the system attempts to load a custom configuration file, configuration files on nvram have priority over configuration files on the router's compact flash.

The priority for loading a configuration file is as follows:

1.nvram: *.cfg

2.Router flash: *.cfg

If the router does not find a valid custom configuration file, the system aborts the process.

	Cisco Integrated Services Router Hardware Installation Guide
1-78	OL-27407-01