Chapter 2 Installing the Router

Installing the Cisco 810 ISR

Mounting Bracket, page 2-10

Ceiling Grip Clips, page 2-11

Mounting the Cisco 812 ISR Below a Suspended Ceiling, page 2-13

Mounting the Cisco 812 ISR on a Hard Ceiling or a Wall, page 2-15

Mounting the Cisco 812 ISR to a Network or Electrical Box, page 2-17

Grounding the Cisco 812 ISR, page 2-18

Mounting Hardware

Mounting hardware for the Cisco 812 ISR consists of brackets, which connect to the bottom of the router, and ceiling grid clips, which connect the bracket to a suspended ceiling. The bracket that you need depends on the mounting location for the router. The ceiling grid clip that you need depends on the type of suspended ceiling where you need to install the router. You do not need ceiling grid clips if you are mounting the router to a hard-surface ceiling or a wall.

Mounting Bracket

The Cisco 812 ISR has only one mounting bracket. The C810-BR-CM universal bracket is versatile. It works with electrical boxes, can be used for wall mounting, and adapts to ceiling installations.

Figure 2-10shows the universal bracket installed on the Cisco 812 ISR.

 

Cisco Integrated Services Router Hardware Installation Guide

2-10

OL-27407-01

Page 124
Image 124
Cisco Systems OL-27407-01 manual Mounting Hardware, Mounting Bracket