Cisco Systems OL-27407-01 manual USB Interface, LED Indicators for LAN Ports

Chapter 1 Product Overview

Cisco 860, 880, 890 Series

Note For the Cisco C867VAE-POE-W-A-K9, Power-over-Ethernet (PoE) is available using port FE0, with a 60-W power supply.

USB Interface

The USB 2.0 interface enables:

•Transferring data using a USB flash token (USB memory stick) for system recovery and other tasks.

•Cisco IOS software boot from USB.

Use only the following Cisco USB 2.0 flash tokens:

•MEMUSB-128FT (128 MB)

•MEMUSB-256FT (256 MB)

•MEMUSB-1024FT (1 GB)

Note The USB 2.0 port cannot be used for connecting external devices or as a console for devices other than those specified in the USB eToken Device and USB Flash Features Support Data Sheet, available at: http://www.cisco.com/en/US/prod/collateral/modules/ps6247/product_data_sheet0900aecd80232473.h tml

LED Indicators

These router models include LED indicators on the back panel for each LAN port, and additional LED indicators on the front panel of the unit.

LED Indicators for LAN Ports

On the back panel of the unit, each LAN port includes an LED indicator. Table 1-24describes the LED indicators.

Table 1-24 Back Panel LED Indicators for LAN Ports

		Port	LED Color	Description
		FE Ports
		FE LAN 0	Green	Off—No link.
				Faster flashing indicates heavier traffic.
		FE LAN 1	Green	Off—No link.
				Faster flashing indicates heavier traffic.
		FE LAN 2	Green	Off—No link.
				Faster flashing indicates heavier traffic.
		GE Ports
		GE LAN 0	Green	Off—No link.
				Faster flashing indicates heavier traffic.
		GE LAN 1	Green	Off—No link.
				Faster flashing indicates heavier traffic.
	Cisco Integrated Services Router Hardware Installation Guide
1-40				OL-27407-01