Cisco Systems OL-27407-01 manual On when the GE WAN interface is up

Chapter 3 Connecting the Router

Cisco 860, 880, 890 Series

Table 3-4	Verifying the Router Operation (continued)
Power and Link		LEDs to Check	Normal Patterns
To WAN GE line		GE Mode	On when GE WAN mode is selected.
(860VAE models			Off when the device is powered off or when DSL WAN
only)
			mode is selected.
		GE ACT	On when the GE WAN interface is up.
			Blinking when there is GE WAN activity (traffic in either
			direction).
			Off when the device is powered off or when the GE WAN
			interface is down.

1.FE = Fast Ethernet.

2.xDSL = General term referring to various forms of DSL, including ADSL (asymmetric digital subscriber line), VDSL (very-high-data-rate digital subscriber line), and G.SHDSL.

3.DSLAM = digital subscriber line access multiplexer.

4.3G = Third-Generation.

5.WWAN = wireless WAN.

6.RSSI = Received Signal Strength Indicator.

7.CDMA = code division multiple access.

8.GSM = Global System for Mobile Communications.

9.PPP = Point-to-Point Protocol.

10.PPPoE = PPP over Ethernet.

11.PPPoA = PPP over ATM.

12.VPN = Virtual Private Network.

13.SSID = service set identifier.

14.PoE = Power over Ethernet.

	Cisco Integrated Services Router Hardware Installation Guide
OL-23125-02		3-47