Cisco Systems OL-27407-01 manual Connecting a GE Line to an GE WAN Port, Connecting an xDSL Line

Chapter 3 Connecting the Router

Cisco 860, 880, 890 Series

Connecting a GE Line to an GE WAN Port

To connect the Gigabit Ethernet (GE) WAN port on the router, follow these steps:

Step 1 Connect one end of the yellow cable to the GE WAN port as shown in Figure 3-27.

Figure 3-27 Connecting the GE WAN Port

274493

1

2

3

Internet

1 GE WAN port 3 Modem connected to the Internet

2CAT 5 cable

Step 2 Connect the other end of cable to an available port on the modem.

Connecting an xDSL Line

Warning Hazardous network voltages are present in WAN ports regardless of whether power to the unit is OFF or ON. To avoid electric shock, use caution when working near WAN ports. When detaching cables, detach the end away from the unit first. Statement 1026

	Cisco Integrated Services Router Hardware Installation Guide
OL-23125-02		3-31