Cisco Systems OL-27407-01 manual Attaching the Standard Brackets

Chapter 2 Installing the Router

Installing the Cisco 810 ISR

To mount the router on a wall, follow these steps:

Step 1 Remove the screws on the sides of the routers.

Step 2 Attach the standard brackets to the chassis using the three screws provided for each bracket. (See Figure 2-21.)

Figure 2-21 Attaching the Standard Brackets

282622

Step 3 Install the router to a wall stud using two number-10 wood screws, round- or pan-head, with number-10 washers or two number-10 washer-head screws. The screws must be long enough to penetrate at least 1.0 inch (25.4 mm) into the supporting wood or metal wall stud. (See Figure 2-22.)

Note The orientation of the Cisco 819 ISR products is critical when wall-mounting. The router must be oriented as shown in Figure 2-22with the left side of the router rotated up (as viewed from the IO side) to comply with IP41 and safety criteria. No other wall mounting orientation is supported.

	Cisco Integrated Services Router Hardware Installation Guide
2-26	OL-27407-01