C812G-CIFI+7-E-K9, C812G-CIFI+7-N-K9 | Cisco Systems OL-27407-01

Appendix A Technical Specifications

Cisco 810 Series

Table A-1	Cisco 812 ISR Specifications

				C812G-CIFI+7-E-K9
				C812G-CIFI+7-N-K9
				C812G-CIFI-V-A-K9
		C812G+7-K9		C812G-CIFI-S-A-K9
Description		(3G only)		(3G + WiFi)

Physical Characteristics

Dimensions (H x W x D)		2.01 x 8.95 x 9.49 inches (51 x 227x 241 mm)

Weight		3.96 lbs (1.8 kg)

Maximum Power Consumption		11 W		18 W

Extended Shock-vibe		No

IP41 (with DC adapter)		No

Environmental Operating Ranges

Operating Temperature and		–32 to 104 °F (0 to 40 °C)
Altitude
Altitude		Derate max operating temperature 1.5 °C per 1000 ft above 5000 ft


		10,000 ft maximum except CCC1 only up to 2000 meters.
Humidity		Maximum 85% non-condensing RH

Ingress Protection Rating		IP 20 per IEC 60529

Standard Safety Certifications		•	UL 60950-1, 2nd edition
		• CAN/CSA C22.2 No. 60950-1, 2nd edition
		• EN 60950-1, 2nd edition
		• CB to IEC 60950-1, 2nd edition with all group differences and national deviations
		• AS/NZS 60950-1, Edition 1 (Australia and New Zealand)

EMC Emissions		•	EN55022/CISPR22
		• CFR 47 Part 15
		•	ICES003
		•	VCCI-V-3
		•	AS/NZS CISPR22
		•	CNS13438
		•	CISPR22
		•	CNS13438
		•	EN300-386
		•	EN61000-3-2
		•	EN61000-3-3
		• EN61000-6-1

EMC Immunity		•	EN55024/CISPR24 (EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5,
			EN61000-4-6, EN61000-4-11)
		•	EN300-386

Cisco Integrated Services Router Hardware Installation Guide

	A-2	OL-27407-01

Image 228

Cisco Systems OL-27407-01 manual C812G-CIFI+7-E-K9, C812G-CIFI+7-N-K9, C812G+7-K9

Contents

Cisco Systems, Inc Page Preface Objective Memory Installing the Cisco 880G for 3.7G HSPA+/3.5G Hspa ISRs Initial Configuration of the Wireless Access Point Power Supply A-22 OL-27407-01 Preface Chapter Name Description Bewaar Deze Instructies Warnung Wichtige Sicherheitshinweise Avvertenza Importanti Istruzioni Sulla Sicurezza Aviso Instruções Importantes DE SegurançaPage GEM Disse Anvisninger Xiii Xiv Page Related Documentation Xvii Xviii Cisco 812 Series General DescriptionA P T E R This section contains the following Cisco 812 ISR 3G diversity antenna WiFi LED 3G main antenna 3G LED Hardware Features Platform FeaturesCisco 812 ISR supports the following hardware features Antenna LEDs Rssi 2describes the WiFi LED for the Cisco 812 ISR Color Description Power Supply Following are power adapters supported in the Cisco 812 ISRAC Power Adapter Memory SKU Information C812G-CIFI-V-A-K9C812G-CIFI-S-A-K9 Cisco 819 Series Cisco 819HG Integrated Services Router Wlan LED 7shows the front panel details of the Cisco 819HG ISR 8shows the front panel details of the Cisco 819HGW ISR SKU ID Cisco Integrated Services Router Hardware Installation Guide WiFi External Antenna Support Description Mode Frequency Band Description Rebranding of C8xx-B and EHWIC-3G-EVDO-B HSPA+/HSPA Platform Features for Cisco 819 ISRs MB DramYes GB Dram Snmp Yes Tftp support with Ethernet WAN Interface Warm reload Power Switch Reset ButtonAntennas SYS ACT WwanGPS Wlan LED 4G LTE LED Descriptions SIM Embedded 3G Modem Embedded 4G LTE ModemSIM Card Two Internal SIM Card Slots Supported Cisco Antennas and Cables 3G-ANTM-OUT-OM3G-ANTM-OUT-LP 3G-ACC-OUT-LA AIR-ANTM2050D-R AIR-ANT2430V-RAIR-ANT5140V-R AIR-ANT2440NV-R Maximum Gain Cisco Part Number Description Frequency Ranges AIR-CAB005LL-R AIR-CAB020LL-RAIR-CAB050LL-R Maximum Insertion Serial Port 4G-CAB-ULL-2020 ft 6 m 700 to 2600 MHz Black Yes 4G-CAB-ULL-50 DC Power Adapters 10 12-in-1 Serial Port Accessories Railway Power AdaptersCisco Part Number Accessory General Description Cisco 860 Series ISRs 11 Front Panel of the Cisco 860 Series Wireless ISR Cisco 860VAE Series ISRs InterfacesIOS Images Model Interfaces 14shows the back panel details of the Cisco 866VAE ISR Model-Specific Features FeatureC866VAE-W-E C867VAE-W-A C867VAE-W-E Isdn Pots Common Features Interface ConnectorExternal Interfaces Port LED Indicators LED Indicators for LAN PortsUSB Interface Port LED Color Description LED Indicators on Front Panel LED indicators Cisco 880 Series ISRs LED Color LED Activity Description Cisco 880 Series Data Routers 18 Front Panel of the Cisco 880 Series Wireless Data Router Isdn Primary WAN port-VDSL/ADSL over Reset button 20 Back Panel of the Cisco 887VA and 887VA-M Router Cisco 880 Series Voice and Data Routers Cisco 881 Srst and Cisco 888 Srst LEDs USB port 23 Back Panel of the Cisco C881SRST-W Voice Router Cisco 881-V, Cisco 887VA-V, and Cisco 887VA-V-W 24 Back Panel of the Cisco C888SRST-W Voice Router Flexible Complexity Medium Complexity High Complexity C881-V C887VA-V C887VA-V-WLEDs USB port PoE power connector optional 27shows the back panel for the Cisco 881-V router Cisco 880 Series with Embedded Wlan Antennas Cisco 887VA-WD C881WD 29 Back Panel of the C887VA-WD-A-K9 and C887VA-WD-E-K9 ISRs C881G-B/S/V-K9 ISRs C881GW-S/V-A-K9 ISRs C881G-U-K9 ISRs HSPA+ Versions of the Fixed-Platform ISRs Cisco C881 Router Hardware DescriptionFAN WAN 32 Front Panel of the Cisco C881 Router Cisco C886VA Router 33shows the back panel of the Cisco C881 Router Primary WAN port-VDSL/ADSL over On/Off switch USB port Reset buttonCisco C886VAJ Router Cisco C887VA Router 37shows the back panel of the Cisco C886VAJ Router Cisco C887VAM Router 39shows the back panel of the Cisco C887VA Router Cisco 890 Series ISRs Cisco 891, Cisco 892, and Cisco 892F 42 Front Panel of the Cisco 890 Series Wireless ISR LEDs USB ports 43 Back Panel of the Cisco 892-W Router Cisco 892FSP, Cisco 896VA, Cisco 897VA, and Cisco 898EA SFP port SFP LEDs 45shows the back panel of the Cisco 892FSP router 47shows the back panel of the Cisco 896VA router 49shows the back panel of the Cisco 897VA router 51shows the front panel of the Cisco 897VAM router 54shows the back panel of the Cisco 897VAMW router 55shows the back panel of the Cisco 898EA router PoE PoE ports Port GE or 1-port SFP Cisco C891F Router 57shows the front panel of the Cisco C891F Router Primary WAN port-GE WAN On/Off switch Cisco C891FW RouterBack up WAN port-FE WAN Console / Auxiliary port SFP Product Overview Cisco C891 Series ISRs Hardware Features Back up WAN port-FE Serial port-Console or auxiliary Reset Button Cisco 860VAE Routers-Custom Configuration FileKensington Lock OL-27407-01 LEDs Color Description Series Wlan Link VPNGreen On-VPN is connected All models PPP3 3G8 WWAN9 3G RSSI103G CDMA12 Srst Activity Description GE Mode Activity Color Activity Description Memory Flash MemoryModels Flash Memory Storage USB Port Main MemoryModels Expandability Power Supply Power over Ethernet ModuleFan Wireless LAN Connectivity Throughput Mode Antenna3G Cellular Data WAN Connectivity Maximum Data Radio Module Platform Throughput1 Mode Antenna Supported Cisco Radio AntennasCisco Part Number Antenna Type Maximum Gain Description AIR-ANTM4050V-R Feature Summary Feature Description SeriesSmall Form-Factor Pluggable Port RTC SRST17 FXS19/DID20 Feature Description Series Installing the Router Installing the Cisco 812 ISR Installing the Cisco PoE+ Splitter Items Shipped with your RouterItems Shipped with your PoE+ Splitter Screws Power cord connector Power cord lock Placement of the Power Cord Lock onto the Power Cord Remove one ceiling tile to gain access To lock into the T-rail as shown in Figure Installing the SIM Card Accessing the SIM Card Installing the 3G Antenna SIM Access Panel Mounting the Cisco 812 ISR Mounting Hardware, Mounting Hardware Mounting Bracket 10 Universal Bracket Installed on the Cisco 812 ISR Ceiling Grip Clips Additional Adapters for Channel and Beam Ceiling Rails 11shows a ceiling grid clip Mounting the Cisco 812 ISR Below a Suspended Ceiling 12 T-Rail, Channel, and Beam Ceiling Rail Types Installing the Router Installing the Cisco 810 ISR Mounting the Cisco 812 ISR on a Hard Ceiling or a Wall 14 Suspended Ceiling Mounting Details 15 Universal Mounting Bracket Details 16 Routing the Ethernet and Power Cables Mounting the Cisco 812 ISR to a Network or Electrical Box Grounding the Cisco 812 ISR Installing the Cisco 819 ISR 17 Connecting the Ring Lug onto the Grounding Point Equipment, Tools, and Connections Items Shipped with your Router Additional ItemsConnections Ethernet Devices Installing the Router Accessing the SIM Card Replace the panel and the screws Installing Antennas Installing a WiFi External Antenna Installing on a Table Mounting on a Wall 21 Attaching the Standard Brackets Installing a DIN Rail 22 Installing the Router to the Wall Turn the router sideways so that the antenna is at the top Space between the latch and hook 25 Cisco 819 ISR Installed with the DIN Rail 26 Configurable Low Profile DIN Mount standard configuration Configuring the Mount 27 Low Profile DIN Mount Configuration Attaching the mount to the router Installing the Router Ground Connection Ring terminal Installing the Power Cord Retention Lock Ring Power cord lock Installing the Power Switch Lock End of tabs 34 Installing Power Switch Lock Mounting the DC Power Supply 36 DC Power Supply Wall-Mounting Features No user-serviceable parts inside. Do not open. Statement Indoors. StatementStatement Equipment, Tools, and Connections Additional ItemsCisco 860VAE Series Routers Installing the Cisco 860, 880, and 890 Series Routers ConnectionsEthernet Devices Installing on a Table Mounting on a Wall 37 Wall-mount Holes on the Underside of the Router 38 Router Mounted on the Wall Installing the Router Ground Connection Installing the Fips Cover Remove the four mounting screws of the top cover Install the left-side Fips cover, as shown in detail a Secure the Fips cover with two mounting screws Installing Antennas for Cisco 890 Series 40 Attaching Antennas to the Router 41 Antennas Oriented Vertically Up 42 Antennas Oriented Vertically Down Installing Cisco 890 Series in a Rack Screws 272484 Installing the C881G-B/S/V-K9 ISR Installing the C881GW-S/V-A-K9 ISRInstalling the C881G-U-K9 ISR Installing Antennas SIM Card Installation Installing the Cisco 880G for 3.7G HSPA+/3.5G Hspa ISRs Connecting the Router Preparing to Connect the Router Connecting a PC, Server, or Workstation Preventing Damage to the Router Connecting an External Ethernet Switch Connecting to an Ethernet Switch Connecting a Terminal or PC to the Console Port Connecting a Terminal or PC to the Console Port Connecting a Modem to the Console Port Connecting the AC Adapter Connecting the DC Adapter DC Power Supply PWR1-20W-12VDC and PWR1-20W-24VDC Verifying Connections LEDs to Check Normal Patterns Connecting the Router Cisco 860, 880, 890 Series Safety Warnings Preparing to Connect the Router Preventing Damage to the Router Connecting a PC, Server, or Workstation Connecting a Phone Connecting a Phone Connecting an External Ethernet Switch Connecting the V.92 modem Port 10 Connecting to Your Service Provider Through the V.92 port Connecting a Terminal or PC to the Console Port Terminal Emulator Settings Connecting a Modem to the Auxiliary Port 12 Connecting a Modem to the Aux Port Connecting the 3G Card Pins on the locking bracket for alignment 13 Inserting the 3G Card 15 Installing the Locking Bracket 3G card Notch on the 3G card Locking bracket Close the locking bracket, as shown in Figure 16 Closing the Locking Bracket Antenna on a cradle Antenna Ssmb connector Antenna connector receptacle1 Description SKUs Supported Installing the 3G Adapter for Extended Cable/Antenna 20 Locating the Phillips Screw Locate the hooks on the adapter as shown in Figure Hooks aligned and inserted into the router 23 Attaching the Adapter 24 Adapter Connected to 3G Card and Router Chassis Connecting a Data BRI Port Inches 66 dB 21003G-ACC-TS9-TNC Inches 62 dB 2100 25 Connecting the Data BRI Port to the Isdn Line Connecting an FE Line to an FE WAN Port 26 Connecting the FE WAN Port Connecting a GE Line to an GE WAN Port Connecting an xDSL Line OL-23125-02 28 Primary Protection Device Location Connecting Power over Ethernet Connecting the AC Adapter 120 VAC, 20 a U.S VAC, 16 to 20 a international. Statement VDC plug Power adapter-12 VDC Power cord AC plug 31 Connecting the AC Adapter VDC plug Power adapter-12 VDC Power Adapter Cord AC Plug PinNC1 +12 34 Securing the Power Cord Connecting an FXS Line Power lock clip Power adapter Power cord AC plug Connecting an FXO Line 36shows an FXS line connection 37 Connecting an FXO Line Connecting a Voice Isdn BRI Line 38shows a voice BRI line connection 117722 Verifying Connections LAN On when the GE WAN interface is up Blinking when there is GE WAN activity traffic in eitherOff when the device is powered off or when the GE WAN OL-23125-02 Setup Command Facility Cisco IOS CLI Cisco Configuration Professional Express Verifying the Initial ConfigurationCisco IOS CLI Press Return. The following message is displayed Username username privilege 15 secret 0 password Setup Command Facility Following message is displayed Enter a hostname for the router this example uses Router Enter interface name used to connect to Verifying the Initial Configuration Configuration is displayed Initial Configuration of the Wireless Access Point OL-23125-02 Technical Specifications Router Specifications Description 3G only 3G + WiFi Physical Characteristics C812G-CIFI+7-E-K9C812G-CIFI+7-N-K9 C812G+7-K9 Description 3G only 3G + WiFi Embedded WiFi AntennaRadio Immunity EN301 489-1, EN 301 489-7, and EN301 Mean Time Between Failure Ground Benign Environment SKUs Mtbf hours Table A-3 Cisco 819 ISR Specifications Table A-3 Martek Railway Power Adapters2 Table A-4 Supported Power Adapters C819G+7-K9C819G-B-K9 Range 4G LTE SKUs 3GSKUs WiFi SKUs RangeC819HG-B-K9 C819HG-S-K9 Range 4G LTE SKUs 3G SKUs 3G + WiFi SKUs C819HGW-S-A-K9C819HG-B-K9 C819HGW-V-A-K9 C819HG-S-K9 C819HGW+7-E-K9 Router Specifications All Models Except Cisco 860VAE SeriesThis sections contains the following Design Specification Description Cisco 860VAE series Physical DimensionsRouter Power Adapter Inline Power-over-Ethernet Adapter Cisco 860VAE Series AC AdapterPWR-30W-AC Description Specification Description Cisco 860VAE seriesEnclosure X 9 x 1.75 in. W x D x H Sound Pressure Convection cooled, no fan Description Design Specification Physical Dimensions Cisco 870 Series Description Design Specification Optional external Inline PoE adapter SpecificationsPower delivered via pins 4,5,7 Cisco 880 Series Wireless models H x W x D External Power SupplyRouter Power Specifications Operating temperature Cisco 880G Series 3G Wireless Integrated Services Router Maximum output power 80W Output voltage, external 48 VDCCisco 880VA Series Wireless models Power Supply Cisco 890 Series Power Supply Wireless Access PointPower Supply Unit Volt 30 W Ampere 60 W GE Signal FE and GE Port PinoutsPin Function Pin LAN and WAN Console and Auxiliary Port Connector Pinouts FXS and FXO Port Connector PinoutsVDSL2 Port Connector Pinouts ADSL2+ Port Connector Pinouts Port Connector PinoutsShdsl Port Connector Pinouts RJ-11 Pin Data BRI Port Connector Pinouts TXPRXP TXN SFP Port Connector Pinouts Voice Isdn BRI Interface Pin Numbers and FunctionsIsdn BRI NT/TE Card NT Interface TE Interface Cable Specifications Ethernet Cable SpecificationsMaximum Cable Length Type Category