Cisco Systems OL-27407-01 manual 55shows the back panel of the Cisco 898EA router

Chapter 1 Product Overview

Cisco C881, C886, and C887 Series ISRs

Figure 1-55shows the back panel of the Cisco 898EA router.

Figure 1-55 Back Panel of the Cisco 898EA Router

11

RJ45 ONLY SHDSL

GE WAN

	SFP
8	8

7	6	GELAN	5	4		Cisco 898EA
					CONSOLE
						RESET
3	2	POE	1	0	AUX	1.2A
						2.5A

344774

	1	2	3		4	5	6	7	8	9	10
1	GE WAN interface			7	On/Off switch
2	SFP port			8	Reset button
3	USB port			9	Earth ground connection
4	8-port Gigabit Ethernet switch1			10	Kensington security slot
5	Console / Auxiliary port			11	SHDSL (RJ45 Only)
6	Power connector

1.Port 0 through 3 can be configured as POE. POE is an optional feature for this model. If this feature was not configured with the factory order, you must order and install it to enable the PoE function.

Caution The primary WAN port is designed for an RJ-45 connector only. Damage to the primary WAN port may occur if a non-RJ-45 connector is inserted.

Figure 1-56shows the front panel of the Cisco 898EA router.

Figure 1-56 Front Panel of the Cisco 898EA Router

344773

1

1

LEDs

	Cisco Integrated Services Router Hardware Installation Guide
OL-27407-01		1-71