Cisco Systems OL-27407-01 manual Power cord connector Power cord lock

Installing the Cisco 810 ISR

Figure 2-2 6-32 Screws

1

2

Chapter 2 Installing the Router

3

4

285668

1	6-32 screws	3	To PoE+ power source
2	Power cable with power cord lock installed	4	GE CAT5 cable

Step 3 Connect the supplied plenum rated Cat5 cable to the GE0 port on the PoE+ splitter.

Step 4 Connect the Cat5 cable from your PoE+ source to the PoE+ in port on the PoE+ splitter.

Step 5 Place the power cord lock onto the power cord behind the connector overmold as shown in Figure 2-3. Slide the power cord lock forward so that it captures the overmold and is fully seated.

Figure 2-3 Placement of the Power Cord Lock onto the Power Cord

1

2

345076

1

2

Power cord connector

Power cord lock

Cisco Integrated Services Router Hardware Installation Guide

2-4 OL-27407-01