Cisco Systems OL-27407-01 manual Lan

Chapter 3 Connecting the Router

Cisco 860, 880, 890 Series

Table 3-4	Verifying the Router Operation (continued)
Power and Link		LEDs to Check	Normal Patterns
To wireless LAN		WLAN LINK	Wireless LAN link status:
			• Green if at least one client is associated.
			• Off if no client is associated.
		WLAN 2.4 GHz	Wireless LAN 2.4-GHz status:
			• Green when radio is connected, SSID13 is configured,
			signal is being transmitted, and client is associated.
			• Slow blinking when radio is connected, SSID is
			configured, and signal is being transmitted.
		WLAN 5.0 GHz	Wireless LAN 5.0-GHz status:
			• Green when radio is connected, SSID is configured,
			signal is being transmitted, and client is associated.
			• Slow blinking when radio is connected, SSID is
			configured, and signal is being transmitted.
PoE14		PoE 0 (880 and	PoE power status:
		890 series only)	• Green when connected and powered.
		PoE 1 (880 and	• Amber when there is a fault with the inline power
		890 series only)
			supply.
		PoE 2 (890 series
		only)
		PoE 3 (890 series
		only)
To LAN GE/FE line		LAN	Blinking when there is LAN activity (traffic in either
(860VAE models			direction).
only)			Off when the link is down.
To DSL line		DSL LINK	On when DSL WAN mode is selected and DSL training
(860VAE models			complete.
only)			Blinking when DSL WAN mode is selected but incomplete
			DSL LinkUp state such as in-training (slow initially, fast
			when almost connected), or controller "OFF", or no cable
			attached to DSL connector.
			Off when the device is powered off; or GE WAN mode is
			selected.
		DSL ACT	On when the DSL interface is up.
			Blinking when there is DSL WAN activity (traffic in either
			direction).
			Faster blinking when there is heavier traffic.
			Off when the device is powered off or the DSL WAN
			interface is down.

	Cisco Integrated Services Router Hardware Installation Guide
3-46	OL-23125-02