Cisco Systems manual Managing the Cisco SFS 3012R Server Switch, Removing a Pinch Connector

Chapter 2 Installing and Booting the Cisco SFS 3012R Server Switch

Managing the Cisco SFS 3012R Server Switch

Figure 2-7 Removing a Pinch Connector

Press here

Press here

13

144962

To remove a cable with a pull connector, grasp the connector with one hand and push it toward the port, and then pull the latch away from the port with your other hand and gently wiggle the connector away from the port, as shown in Figure 2-8.

Figure 2-8 Removing a Pull Connector

Hold here

Pull here

10

Hold here

144963

Managing the Cisco SFS 3012R Server Switch

You can manage the Cisco SFS 3012R Server Switch with the following methods:

•Command Line Interface (CLI)—a text-based interface accessible through a direct serial connection, Telnet over IP, or SSH over IP.

•Element Manager (GUI)—A graphical interface installed on a workstation, accessible over IP.

•Chassis Manager (GUI)—A graphical interface that you access with a web browser.

Refer to the Cisco SFS 7000 Series Product Family Element Manager User Guide, Cisco SFS 7000 Series Product Family Chassis Manager User Guide, and the Cisco SFS 7000 Series Product Family Command Reference for more information about managing the Cisco SFS 3012R Server Switch.

	Cisco SFS 3012R Multifabric Server Switch Hardware Installation Guide
2-12	OL-11187-01