Ethernet Gateway LEDs, Ethernet Port LEDs | Cisco Systems SFS 3012R

Chapter 5 Cisco SFS 3012R Server Switch LEDs

Ethernet Gateway LEDs

Ethernet Gateway LEDs

Table 5-14 Ethernet Gateway LED Indications

LED States	Indication

Yellow on, green off	Auxiliary power has reached the gateway.

Green on, yellow off	Gateway runs successfully.

Green on, yellow on	An error has occurred.

Ethernet Port LEDs

Ethernet port LEDs are located on the Ethernet ports. Figure 5-8shows the location of the Ethernet port LEDs for one port.

Table 5-15explains Ethernet port LED indications.

Table 5-15	Ethernet Port LED Indications

LED State		Indication

Status LED off		No physical link.

Status LED solid		Successful physical link.

Activity LED off		No logical link.

Activity LED blinking		Traffic runs over the port.

Activity LED solid		Logical link established but traffic does not yet run.

	Cisco SFS 3012R Multifabric Server Switch Hardware Installation Guide
5-12	OL-11187-01

Image 78

Cisco Systems SFS 3012R manual Ethernet Gateway LEDs, Ethernet Port LEDs

Contents

Corporate Headquarters Text Part Number OL-11187-01Page N T E N T S Blower Modules Cisco SFS 3012R Server Switch LEDs OL-11187-01 Audience OrganizationChapter Title Description Conventions Convention Description Statement 1071-Warning Definition Bewaar Deze Instructies Warnung Wichtige Sicherheitshinweise Avvertenza Importanti Istruzioni Sulla SicurezzaAviso Instruções Importantes DE Segurança Guarde Estas Instrucciones GEM Disse Anvisninger Xiii Related Documentation Xiv Obtaining Documentation Cisco.comProduct Documentation DVD Ordering Documentation Reporting Security Problems in Cisco Products Documentation FeedbackCisco Product Security Overview Product Alerts and Field Notices Obtaining Technical AssistanceCisco Technical Support & Documentation Website Submitting a Service Request Definitions of Service Request Severity Obtaining Additional Publications and Information Xix Preface Obtaining Additional Publications and Information Cisco SFS 3012R Server Switch Overview Introduction Unified Fabric FeaturesPerformance Transparent Topology Scalability Fully Redundant System Architecture Cisco SFS 3012R Server Switch Chassis 6 8 10 12 Cisco SFS 3012R Server Switch Components Controller Modules Cisco SFS 3012R Server Switch Controller Module Ethernet and Fibre Channel Gateways Ethernet ports Ethernet gateway status LEDs Ejector handle Fibre Channel Gateway Expansion Module InfiniBand Switch Modules InfiniBand Switch Module Power Supply Modules Power Supply Module Blower Modules Blower Module OL-11187-01 Installing and Booting the Cisco SFS 3012R Server Switch Safety OL-11187-01 Preparing for Installation Installing Cisco SFS 3012R Server Switch Components Mounting the Cisco SFS 3012R Server Switch on a Rack Mounting bracket Shelf rail Attaching the Shelf to the Rack Positioning and Sliding the Chassis onto the Shelf Firmly tighten the shelf screws at the cable end Attaching a Serial Console Cable to a PC or Terminal Assigning a Static IP Address Obtaining an IP Address with Dhcp Connecting InfiniBand Hosts Following example InfiniBand Cable with Pinch Connector Managing the Cisco SFS 3012R Server Switch Removing a Pinch Connector A P T E R Installing a Controller Module Inserting the Controller Module Adding or Replacing Ethernet or Fibre Channel Gateways Installing an InfiniBand Switch Module Close both fastener levers simultaneously and completely Securing an InfiniBand Switch Module Removing an InfiniBand Switch Module Installing a Power Supply Module 180762 Removing a Power Supply Module Installing a Blower Module Inserting a Power Supply Removing a Blower Module OL-11187-01 Viewing and Updating the Software Image Viewing the Software Image Version Viewing the Software Image Version with the CLI SFS-3012R#show card-inventory Viewing the Software Image Version of the Controller Module Updating the Software Image Viewing Current Image of an Individual Module Updating the Software Image with the CLI This example shows the copy operation Updating the Software Image with the Element Manager GUI Click the Import button Import File window appears Select Maintenance-Reboot Deleting a Software Image Deleting an Image with the CLI Select Maintenance File Management Deleting an Image with the Element Manager GUI Cisco SFS 3012R Server Switch LEDs Cisco SFS 3012R Server Switch System Status LED LED State Indication Power Supply LEDs Power Supply LEDs Blower Module LEDs Blower Module LEDs Controller LEDs Controller LED States IndicationBlower LED States Indication Power LED States Indication Location of Management Ethernet Port LEDs InfiniBand Switch Module LEDs InfiniBand LEDsLED States Indication InfiniBand Port LEDs Fibre Channel LEDs Fibre Channel Gateway LEDs Fibre Channel Port LEDs Off Gbps Solid green Ethernet Gateway LEDs Location of Ethernet Gateway and Ethernet Port LEDs Ethernet Gateway LEDs Ethernet Port LEDs General Specifications Specification Detail Electrical Specifications Laser SpecificationsCertifications/Regulatory D E IN-2 IN-3 IN-4