Cisco Systems SPA303, SPA301 manual Creating a Three-Way Conference Call

Using Basic Phone Functions	2
Creating a Three-Way Conference Call

Creating a Three-Way Conference Call

You can easily create a three-way conference call on your phone.

Task	Instructions
Starting a three-way	1.	After beginning a call with the first party, initiate
conference call		the conference on your phone:
		•	Cisco SPA301: Press				FLASH .
		• Cisco SPA501G: Press the Conference
			button		.
		•	Other models: Press				Conf .
	2.	When you hear a dial tone, enter the extension or
		the phone number for the third party. For an
		outbound call, include the dialing prefix required
		to get an outside line, as well as any long-
		distance prefix required for your phone service.
		(No dialing prefix is required on a shared line.)
	3.	Press FLASH ,				, or	Conf again.
Combining two or more	Not available on Cisco SPA301 and Cisco
current calls to create a	SPA501G
three-way conference	Press		Conflx or	Conf Line .
	•	If you have only one held call, the three-way
		conference call is automatically created.

• If you have more than one held call, the phone prompts you to choose a held call to add to the conference. Press a line button to select a held call.

Ending a conference call Hang up. All parties are disconnected. for all parties

Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W 49