Using Advanced Phone Features | 3 |
| |
Using the Cisco SPA 525G2 With Your |
|
|
|
|
|
Making a Mobile Phone Call Using Your Cisco SPA 525G2
When you make a mobile phone call using your Cisco SPA 525G2, your Cisco SPA 525G2 acts as a handsfree device for your phone. The call is made through your mobile phone, but the audio is present on the Cisco SPA 525G2 and the call control is done using the Cisco SPA 525G2, unless you switch back to your mobile phone. (See “Switching Audio from Your Cisco SPA 525G2 to Your Mobile Phone” section on page 87.)
NOTE Not all mobile phones support this function. See the list of
STEP 1 Press the line button associated with your mobile phone (the line button is marked with a mobile phone icon with a flashing lightning bolt).
STEP 2 Complete one of the following tasks:
• Enter a number to dial and press Dial .
•Press Directory and select the Personal Address book. Choose a number
and press Dial .
• Scroll to select a recently called number and press Select .
NOTE If you usually enter a digit before dialing (such as 9 to reach an outside line), remember that this call is made through your mobile phone. You should follow the usual practice for making calls on your mobile phone (for example, you probably do not dial a digit to reach an outside line on your mobile phone).
The outgoing call appears on both your Cisco SPA 525G2 and your mobile phone screen. The Cisco SPA 525G2 displays an
After the call is connected, the icon next to the mobile phone shows that the call is established. The audio goes through the Cisco SPA 525G2, although the mobile phone screen also shows a connected call.
Cisco SPA300 and SPA500 Series IP Phones with Cisco Unified Communications UC320W | 86 |