Clover Electronics CDR0460, CDR0860, CDR1660 manual Spot Output, Spot Dwell Time

MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6

8.1.4. SPOT

At the SCREEN menu,

Double-click SPOT or highlight SPOT and then press the ENTER button and the SPOT menu will be displayed like the left picture.

Click the X button or press the ESC button to exit from this screen.

8.1.4.1. SPOT OUTPUT

User can select the SPOT OUTPUT type.

There are 3 types of SPOT OUTPUT type namely MANUAL, EVENT and SEQUENCE.

MANUAL: Manually select the channel of spot monitor.

EVENT: Event channel will be displayed automatically on spot monitor.

SEQUENCE: Every single channel will be switching and displaying in sequence.

Click the left button of the mouse on the value and select the desired spot mode. Or in case of using the remote controller or the front panel buttons, highlight SPOT OUTPUT using the ▲,▼ buttons and press the ENTER button and then move the cursor to the desired spot mode using the ▲,▼ buttons and press the ENTER button.

The default is MANUAL.

8.1.4.2. SPOT DWELL TIME

Define the spot monitor sequence mode time from 0 to 10 seconds.

Click the left button of the mouse on the value and select the desired value. Or in case of using the remote controller or the front panel buttons, highlight SPOT DWELL TIME using the ▲,▼ buttons and press the ENTER button and then move the cursor to the desired spot mode using the ◀, ▶ buttons and press the ENTER button.

The default is 2 seconds.

59