MODEL: CDR1660 / CDR0860 / CDR0460 H.264
① Clicking the numeric buttons on the PIP control bar or pressing the numeric buttons of the remote controller will change the PIP window to change the channel to the desired channel.
② Click the directional buttons on the PIP control bar or press the directional buttons of the remote controller or the front panel to place the PIP window to the desired location on the screen.
③Click this button or press the ENTER button of the remote controller or the front panel and the PIP window will be zoomed up.
④Click the 
button or press the ESC button of the remote controller to exit out of the PIP mode.
7.5.7. SPOT MONITOR
The spot monitor allows viewing of individual cameras in the live mode while the main monitor may be busy with different tasks, such as playback. This unit offers a single channel spot output. For detail explanation of the spot monitor setup, refer to chapter 8.1.4 SPOT on page 59.
During any view modes, press the SPOT button of the remote controller for Spot monitor mode.
Press any channel numbers of the remote controller or the CH SELECT button of the front panel to display the channel in full screen mode on the spot monitor.
32
