Clover Electronics CDR0460 manual Auto Sequence, Display, CDR0860 /CDR1660 8channel /16channel

MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6

8.1.1. AUTO SEQUENCE

CDR0460 (4channel)

At the SCREEN menu,

Double-click AUTO SEQUENCE or highlight AUTO SEQUENCE and then press the ENTER button and the AUTO SEQUENCE menu will be displayed like the left picture.

Define the display duration from 0 to 10 seconds. 0 seconds disables the specific display mode’s inclusion in the sequence. The default is 2 seconds.

Change the value by clicking the left button of the mouse on each value.

CDR0860 /CDR1660 (8channel /16channel)

In case of using the remote controller or the front panel buttons, move the cursor to the desired item using the ▲,▼ buttons and press the ENTER button and then select the desired value using the ◀, ▶ buttons and press the ENTER button.

To exit the AUTO SEQUENCE menu, click the X button or press the ESC button of the remote controller or the front panel.

* ADD AUTO SINGLE:

Select the inclusion of single channels in the automatic sequence.

The default is off.

8.1.2. DISPLAY

At the SCREEN menu,

Double-click DISPLAY or highlight DISPLAY and then press the ENTER button and the DISPLAY menu will be displayed like the left picture.

Click the X button or press the ESC button to exit from this screen.

8.1.2.1. HDD FREE SPACE

Select the display option for the remaining space on the hard disk drive. The default is ON.

Click the left button of the mouse on the value. Or in case of using the remote controller or the

front panel buttons, highlight HDD FREE SPACE using the ▲,▼ buttons and press the ENTER button and then move the cursor to the desired value(ON or OFF) and press the ENTER button.

ON: Remaining capacity of the fixed HDDs will be displayed on the screen.

54