Clover Electronics CDR1660, CDR0860 manual Time & Date, Internet Time Adjust, Select Time Zone

MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6

8.3.2.1. TIME & DATE

At the CLOCK Menu,

Double-click TIME & DATE or highlight TIME & DATE and then press the ENTER button and the TIME & DATE setup screen will be displayed like the left picture.

Select the values (year/month/date and hour:minute:second) by clicking the left button of the mouse and then click the APPLY button to set.

Or in case of using the remote controller or the front panel buttons, use the ▲,▼,◀, ▶ buttons to move the cursor and press the ENTER button to select. Press

the ENTER () button on the pop-up window to set the selected value except for month setting. And move the cursor to the APPLY button and then press the ENTER button to set up the changed time and date.

Click the X button or press the ESC button to exit from this screen.

8.3.2.2. TIME ADJUST

At the CLOCK Menu,

Double-click TIME ADJUST or highlight TIME ADJUST and then press the ENTER button and the TIME ADJUST menu will be displayed like the left picture.

Click the X button or press the ESC button to exit from this screen.

8.3.2.2.1. INTERNET TIME ADJUST

Select automatic time adjustment through internet time server on or off by clicking the left button of the mouse on the value. Or in case of using the remote controller or the front panel buttons, highlight INTERNET TIME ADJUST and press the ENTER button and then move the cursor to the desired value using the ▲,▼ buttons and press the ENTER button. The default is OFF.

NOTE:

If the INTERNET TIME ADJUST is “ON”, the time of DVR will be adjusted to the time offered by the internet server.

10 IP addresses of the time server are set in the DVR so the DVR will be adjusted the time with one of 10 IP addresses to have been set in advance.

8.3.2.2.2. SELECT TIME ZONE

Select the time zone for the local time by clicking the left button of the mouse on the value. Or in case of using the remote controller or the front panel buttons, highlight SELECT TIME ZONE and press the ENTER button and then move the cursor to the desired value using the ▲,▼ buttons and press the ENTER button. For the list of the time zone for your local area, refer to the below TIME ZONE LISTING.

70