MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6

At the LINK menu,

Double-click E-MAIL or highlight E-MAIL and then press the ENTER button and you can see the E-MAIL menu like the left picture.

Click the X button or press the ESC button to exit from this screen.

8.4.3.1. SEND E-MAIL

Select the e-mail notification on or off by clicking the left button of the mouse on the value. Or in case of using the remote controller or the front panel buttons, highlight SEND E-MAIL and press the ENTER button and then move the cursor to the desired value using the ▲,▼ buttons and press the ENTER button. The default is OFF.

8.4.3.2. E-MAIL ADDRESS SETUP

Enter the DVR’s e-mail address as assigned by the network administrator, or create one that conforms with the specification of the Internet Service Provider.

NOTE:

You have to set up the E-MAIL ADDRESS 1 to use the e-mail notification function

Double-click one of E-MAIL ADDRESS 1~5 or highlight one of E-MAIL ADDRESS 1~5 and then press the ENTER button and you can see the E-MAIL ADDRESS input screen like the left picture.

Enter the e-mail address by clicking the mouse or moving the cursor using the ▲, ,, buttons and pressing the ENTER button.

Click the X button or press the ESC button to save and exit from this screen.

If you want to delete the characters entered, using the space button.

NOTE : Delete is erased from the front.

NOTE:

The Server can notify the following messages via Email.

a)Alarm

b)Power On

c)HDD Fail

d)V-Loss

Please note that this unit doesn’t notify the Motion event type message due to incapability of large file size and frequent motions.

80

Page 80
Image 80
Clover Electronics CDR0460, CDR0860, CDR1660 manual Send E-MAIL, Mail Address Setup