Clover Electronics CDR1650 instruction manual 105

7. Setup

7-6.9. Recording by Motion Detection

When the menu of motion is properly set up (See section 7-6.3 for all the channels and this section for each of the channels) and detected motion of objects, the system begins recording automatically. The recording icon on the MENU bar should be selected in this recording mode. If not, it won’t be recording.

▫Click the mouse on the button for each of the channels in the RECORD menu and then the MOTION menu will be displayed on the screen as shown in Fig.7-68.

▫Click the (EXIT) button to return to the RECORD menu.

[Fig.7-68 MOTION menu]

▫ON/OFF

The system will start to record when MOTION is detected and the ON is selected in the MOTION menu by clicking the mouse. If the OFF is selected, the system won’t be recording.

[Fig.7-69 MOTION ON/OFF button]

105