Clover Electronics CDR1650 instruction manual All Sensors on / OFF, Size Recording Resolution

7. Setup

7-6.4. All Sensors ON / OFF

▫Click the button in the RECORD menu, then the ALL SENSOR setup pop-up window will be displayed as shown in Fig.7-60.

▫By clicking the mouse, select the on the pop-up window (See Fig.7- 60) to enable the system to start recording by Sensor (Passive Infrared Sensor) for all the

channels.

▫By clicking the mouse, select the on the pop-up window (See Fig.7-60) to disable the system to start recording by Sensor (Passive Infrared Sensor) for all the channels.

[Fig.7-59 All Sensor Setup button]

[Fig.7-60 All Sensor Setup pop-up window]

7-6.5. Size (Recording Resolution)

Select the size of the screen for recording. The larger the size selected, the better display quality is but the larger the data becomes.

▫Click the SIZE (Recording Resolution) button on each of the channels in the RECORD menu, then the SIZE (Recording Resolution) pop-up window will be displayed as shown in Fig.7-62.

▫Select one of the Resolution among D1 (720x480), HALF D1 (720x240) and CIF (360x240) on the pop-up window by clicking the mouse.

[Fig.7-61 Record Size button]

[Fig.7-62 Record Size pop-up window]

101