Stand-alone DVR Instruction Manual
8-4.11 E-Map
E-Map enables users to display the cameras on the digital map for better monitoring.
The digital map should be a BMP file and you can make it (the higher resolution the better) or use the E-map samples saved in the E-map folder (See Fig.8-26).
E-Map mode
[Fig.8-24 E-Map MODE]
8-4.10.1. Addition of map
-Click the E-Map button on the DvrMaster.
-Right-click the MAP as shown in Fig.8-25 and click “Add eMap” on the pop-up window, and then the BMP files factory saved will show up (See Fig.8-26).
-Select a BMP file and click “OPEN button in Fig.8-26, and then an eMap will be saved under the MAP button.
[Fig.8-25 Add eMap] | [Fig.8-26 BMP files] |
