Clover Electronics CDR1650 instruction manual Connection mode, Terminal mode

Stand-alone DVR Instruction Manual

8-4.9. Connection mode

There are two kinds of connection mode (See Fig.8-19) on the DvrMaster. Select one of them by clicking the mouse depending on your application.

Connection mode

[Fig.8-19 Connection Mode]

8-4.9.1. Terminal mode

The functions of icons such as Recording, Play, Copy, Setup, System Status, Pan/Tilt, Display, Zoom and OSD on the bottom of the screen are identical to ones DVR system has.

If the terminal mode button on the DvrMaster (See Fig.8-19) is selected, the image of channel 16 won’t be displaying on the monitor connected to DVR and DvrMaster.

-Right-click on the screen to appear the icons and right-click it again to disappear.

-For displaying a full screen, click one of channels and for the split screen, click it again.

To display the image of channel 16 on the DVR’s monitor,

-Switch the terminal mode to multi mode on the DvrMaster.

-Or exit the DvrMaster by clicking on the upper right-hand corner of the screen.

150