Clover Electronics CDR1650 Installation, Camera Connection Connection of Normal Cameras

Stand-alone DVR Instruction Manual

5-4. Installation

5-4.1. Camera Connection

▫Connection of Normal Cameras

Connect the cameras to the Video Input (BNC connector) on the back of the unit as shown above [Fig. 5-3 System Connection].

▫Connection of Loop Output

The Camera or video output is available from the Video Output (Loop Output) on the back of the unit. (When BNC jack is connected to the Video Output, the termination resistance (75Ω) is automatically switched to impedance status so the external device must have termination resistance.)

5-4.2. Monitor Connection

▫Connection of Main Monitor

Connect the composite monitor to "Main" on the upper part of BNC connector

▫Connection of Auxiliary Monitor

Connect the auxiliary monitor to "Aux" on the lower part of BNC connector. The output of auxiliary monitor port is the same as the main monitor.

24