Clover Electronics CDR1650 instruction manual 144

Stand-alone DVR Instruction Manual

8-4.5. Replay

It is possible to replay the recorded data from the DVR system by using the Replay button in Fig.8-10 in the Multi mode only (refer to section 8-4.9.2).

-Click the Replay button as shown in Fig.8-10 to playback the recorded data from the DVR system, and then the Replay Time Setup Window will be displayed.

Replay Time Setup	Window
		REPLAY button

[Fig 8-10 Replay mode]

-After checking the Start Time and End Time on the upper part of the Replay Time Setup

Window, click the Edit () button to set the Replay Start Time.

-Set the Replay Start Time in the Start Time Setting menu as shown in Fig.8-11and click the OK button. Replaying start time setup can be possible within a recoding time extent.

-Click the Play () button.

-It will start playing the recorded data and the playback control buttons will show up.

[Fig.8-11 Start Time setting]

144