E
Installing SCSI Drivers for Windows NT Installation
The information in this appendix applies to Evo Workstations only.
✎The following information does not apply if you are completing the initial setup of the preinstalled software or if you are restoring your preinstalled image from the Compaq Restore CD.
If your workstation has a SCSI hard drive installed and you are installing Microsoft Windows NT from a retail Microsoft Windows NT Workstation CD or directly from the Compaq Operating System CD, you must complete the following steps.
On a secondary system:
1.Go to the following Compaq Web site: www.compaq.com/support/files/workstations/us/index.html
2.Under locate by computer, select your workstation model and Microsoft Windows NT 4.0, then click Go.
3.Under Storage, choose Family Manager Set Drivers for your specific SCSI controller. Visit the following Compaq Web site if you are not sure which controller shipped with your system:
www.compaq.com/products/quickspecs/productbulletin.html
4.Download the Softpaq to a temporary directory, then execute it to create a diskette with the required SCSI drivers.
Troubleshooting Guide |
