China Post
China Post — continued
Code I.D. Selection
The Code I.D. for this symbology consists of one or two
Example: Setting the China Post Code I.D.
To configure this feature:
1.Determine which character(s) you would like to use to represent the China Post symbology. Reference Appendix A, ASCII Conversion Chart to find the corresponding hex values for your chosen charac- ter(s). In this example we’ll set a Code I.D. of “t” to represent China Post. The value from the table corresponding to ‘’t’ is 74. This value will be used in a step to follow.
2.Scan the START bar code
3.Scan the SET CHINA POST CODE I.D. bar code.
4.Turn to Appendix B,
5.Scan the SET bar code to accept the digits scanned.
6.Turn to the Data Editing chapter and scan the CODE ID POSI- TION: BEFORE BAR CODE DATA label.
Features configured using the Data Editing chapter are universal and will affect all symbologies.
NOTE
7.Scan the END bar code to exit Programming Mode.
8.The resulting message string for scanned China Post labels would appear as follows:
Scanned bar code data: | 0123456789123 |
Resulting message string output: t0123456789123
Product Reference Guide |
