Datalogic Scanning QS6500BT manual 01 10 msec, Gramming Mode, then the Set Wedge Quiet Interval

Interface Related Features

Keyboard Wedge/USB Keyboard — cont.

Wedge Quiet Interval

This feature does not apply to the USB Keyboard interface.

NOTE

Quiet Interval is the amount of time to look for keyboard activity before the imager breaks the keyboard connection in order to transmit data to the host..

START
MODE		BARCODE
	Selectable from 00 (no interval) to 255 in 10 msec
	increments. Use hexidecimal (range: 00 to FF hexidec-
	imal) to set the interval. To configure this feature, scan
	the “START” bar code above to place the unit in Pro-
	gramming Mode, then the Set Wedge Quiet Interval
	bar code followed by the digits from the Alphanumeric
	table in Appendix B, Alpha-Numeric Pad represent-
	ing your desired length. Accept your selection by scan-
	ning the “SET” bar code below and finally, exit
	programming mode by scanning the “END” barcode
	below
	DEFAULT SETTING FOR THIS FEATURE:
		01 (10 msec)
Set Wedge
Quiet Interval
SET
END

4-32 QuickScan® QS6500/QS6500 BT