Datalogic Scanning QS6500BT manual Global Maximum Code Length, Start Mode Barcode

Global Features

Global Maximum Code Length

Global maximum length can be set to qualify data entry. The length is defined as the actual bar code data length to be sent. bar code labels with lengths exceeding these limits will be rejected. Ensure that the mini- mum-length setting is no greater than the maximum-length setting; oth- erwise, the labels of the symbology will not be readable. In particular, you can set the same value for both minimum and maximum lengths to force decoding of only fixed-length bar codes. This setting has no effect on certain symbologies of fixed length.

START
MODE		BARCODE
	Global Maximum length can be set from 0 to 255. To
	set this feature, scan the “START” bar code above to
	place the unit in Programming Mode, then the “Set
	Global Maximum Length,” followed by the digits from
	the Alphanumeric table in Appendix B, Alpha-
	Numeric Pad representing your desired maximum
	length. Accept your selection by scanning the “SET”
	bar code below and finally, exit programming mode by
	scanning the “END” barcode below.
	DEFAULT SETTING FOR THIS FEATURE: 64
Set Global
Maximum
Length

SET

³.

END

Product Reference Guide 3-17