Interface Features
RS-232 Interface Features — cont.
Hardware Flow Control
Disable Hardware Control — The imager transmits to the host regardless of any activity on the CTS line.
Enable CTS Flow Control — The CTS signal controls transmission of data to the host.
Enable CTS Scan Control — The CTS line must be active for the imager to read and transmit data. While the CTS line is inactive, the imager remains in a
Intercharacter Delay
This delay is inserted after each data character transmitted. If the trans- mission speed is too high, the system may not be able to receive all char- acters. You may need to adjust the delay to make the system work properly.
Software Flow Control
Disables/Enables software control using XON/XOFF characters.
Product Reference Guide |
