Symbologies
EAN-13 — continued
ISBN ID Setting
Sets the Code ID used for labels that are translated to ISBN/ISSN num- bers. The Code I.D. for this symbology consists of one or two user- selectable ASCII characters. It can be appended previous to or following the transmitted bar code data depending on how this feature is enabled.
Example: Setting the ISBN ID
To configure this feature:
1.Determine which character(s) you would like to use to represent ISBN/ISSN translated labels. Reference Appendix A, ASCII Conver- sion Chart, to find the corresponding hex values for your chosen character(s). In this example we’ll set a Code I.D. of “I” to repre- sent ISBN/ISSN. The value from the table corresponding to ‘I’ is 49. This value will be used in a step to follow.
2.Scan the START bar code
3.Scan the SET ISBN CODE I.D. bar code.
4.Turn to Appendix B,
5.Scan the SET bar code to accept the digits scanned.
6.Turn to the Data Editing chapter and scan the CODE ID POSI- TION: BEFORE BAR CODE DATA label.
Features configured using the Data Editing chapter are universal and will affect all symbologies.
NOTE
7.Scan the END bar code to exit Programming Mode.
8.The resulting message string for converted ISBN/ISSN labels would appear as follows:
Scanned bar code data: | 97801234565 |
Resulting message string output: I97801234565
QuickScan® QS6500/QS6500 BT |
