General Features
Stand Mode LED
When this feature is set to ON while in stand mode, the illumination LEDs go to a dim state after a timeout of reading no labels. When set to OFF in stand mode, the illumination LEDs go off after a timeout of reading no labels. In both cases, the illumination LEDs come back on when something passes in front of the imager.
START
STATE
BARCODE
LED OFF
LED ON
END
Scan Illumination LED Timeout
Limits the time following pressing the trigger that the illumination LED (aiming light) is lit. Disabling this feature turns the illumination off. Selecting “Continue” means the imager always keeps reading regardless of whether the trigger button is pressed or the standby duration has elapsed.
START
DURATION
BARCODE
Disable
30Seconds
60Seconds
QuickScan® QS6500/QS6500BT |
