Datalogic Scanning QS6500BT manual Prefix/Suffix

Data Editing

Prefix/Suffix — continued

START
MODE		BARCODE
	Sets up to 22 characters each from the set of ASCII
	characters or any hex value from 0 to FF. To config-
	ure this feature, scan the “START” bar code above to
	place the unit in Programming Mode, then the “Set
	Prefix” or “Set Suffix,” followed by the digits from the
	Alphanumeric table in Appendix B, Alpha-Numeric
	Pad representing your desired character(s). Refer-
	ence the section, Example: Setting a Prefix, for
	more information. Accept your selection by scanning
	the “SET” bar code below and finally, exit program-
	ming mode by scanning the “END” barcode below.
	DEFAULT SETTING FOR THIS FEATURE: 00 (None)
Set Prefix
Set Suffix
SET
END

5-4 QuickScan® QS6500/QS6500 BT