Datalogic Scanning QS6500BT manual Beep on Ascii BEL, Beep on Not on File, ACK NAK Options

Interface Related Features

RS-232 Interface Features — cont.

START
STATE	BARCODE
Host Echo
Quiet Interval
= 100msec

Signal

Voltage:

Normal RS-232

Signal Voltage:

TTL

No TTL

Inversion

Invert TTL

END

Beep on ASCII BEL

Enables/disables ability of imager to beep (sound a good read tone) on receiving an ASCII BEL (07 hex).

Beep on Not on File

Select for the host to beep (or not) when a not-on-file (host command) condition is detected by the host.

ACK NAK Options

This enables/disables the ability of the imager to support the RS-232 ACK/NAK protocol. When configured, the imager and/or host sends an “ACK” when it receives data properly, and sends “NAK” when the data is in error. Selections for this option are:

•Disable

4-16 QuickScan® QS6500/QS6500 BT