MESSAGE

 

 

MEANING

SUGGESTED

 

 

SOLUTIONS

 

 

 

 

 

 

 

 

 

Send Error

There is a problem on

Configure your network

(Wrong Config)

the network interface

interface card correctly.

 

card.

 

Toner Empty

The color toner

You can select the

T

cartridge has run out.

option among Stop,

 

The printer stops

Continue or Black Only

 

printing.

with the left/right arrow.

 

Press OK to toggle

If you select Stop by

 

the message to Stop,

pressing OK on the

 

Continue or Black

control panel, the printer

 

Only.

stops printing. If you

 

 

 

W Stop X

select Continue, the

 

 

 

 

printer keeps printing,

 

 

 

If the black

but the quality cannot be

 

 

 

 

 

 

toner cartridge

guaranteed.

 

 

 

is empty,

If you select Black Only,

 

 

 

Black Only

the printer prints the data

 

 

 

message does

in black. In this case, the

 

 

 

not appear.

mono printing feature is

 

 

 

 

preset in the printer

 

 

 

 

properties.

 

 

 

 

When you copy, the

 

 

 

 

Black Start button will

 

 

 

 

be activated only with

 

 

 

 

this condition.

 

 

 

 

If you do not select any,

 

 

 

 

the printer will work as

 

 

 

 

Stop is selected.

 

 

 

 

Replace the color toner

 

 

 

 

cartridge with a new one

 

 

 

 

(see "Replacing the

 

 

 

 

toner cartridge" on

 

 

 

 

page 59).

Toner Exhausted

The lifespan of the

This message appears

T

color toner cartridge

when the toner is

 

which the arrow

completely empty, and

 

indicates is reached.

your printer stops

 

 

 

 

printing. Replace the

 

 

 

 

corresponding toner

 

 

 

 

cartridge with a Dell-

 

 

 

 

genuine cartridge (see

 

 

 

 

"Replacing the toner

 

 

 

 

cartridge" on page 59).

Toner Low

The corresponding

Take out the toner

T

color toner cartridge is

cartridge and thoroughly

almost empty.

shake it. By doing this,

 

 

 

 

If you do not

you can temporarily

 

 

 

 

 

 

want this

reestablish printing

 

 

 

message to

operations.

 

 

 

 

 

 

appear, see

 

 

 

 

"Using toner

 

 

 

 

low alert" on

 

 

 

 

page 56.

 

Tray 2

Paper has jammed In

Clear the jam (see "In

Paper jam 0

the paper feed area.

the paper feed area" on

 

 

 

 

page 65).

Updating Data

This message

Do not turn the power off

Please Wait...

appears when there is

when this message is

 

a change in the

showing. Changes may

 

system setting or

not be saved and datas

 

when you back up a

can be lost.

 

data.

 

 

 

 

 

 

SOLVING OTHER PROBLEMS

The following chart lists some conditions that may occur and the recommended solutions. Follow the suggested solutions until the problem is corrected. If the problem persists, call for service.

Paper feeding

CONDITION

SUGGESTED SOLUTIONS

 

 

Paper is jammed

Clear the paper jam (see "Tips for avoiding paper

during printing.

jams" on page 63).

Paper sticks

• Ensure there is not too much paper in the tray.

together.

The tray can hold up to 250 sheets of paper,

 

depending on the thickness of your paper.

 

• Ensure that you are using the correct type of

 

paper (see "Setting the paper size and type" on

 

page 30).

 

• Remove paper from the tray and flex or fan the

 

paper.

 

• Humid conditions may cause some paper to

 

stick together.

 

 

Multiple sheets of

• Different types of paper may be stacked in the

paper do not feed.

tray. Load paper of only one type, size, and

 

weight.

 

• If multiple sheets have caused a paper jam,

 

clear the paper jam (see "Tips for avoiding

 

paper jams" on page 63).

 

 

Paper does not feed

• Remove any obstructions from inside the

into the printer.

printer.

 

• Paper has not been loaded correctly. Remove

 

paper from the tray and reload it correctly.

 

• There is too much paper in the tray. Remove

 

excess paper from the tray.

 

• The paper is too thick. Use only paper that

 

meets the specifications required by the printer

 

(see "Selecting print media" on page 24).

 

• If an original does not feed into the printer, the

 

DADF rubber pad may require to be replaced

 

(see "Replacing the DADF rubber pad" on

 

page 62).

 

 

The paper keeps

• There is too much paper in the tray. Remove

jamming.

excess paper from the tray. If you are printing

 

on special materials, use the multi-purpose tray.

 

• An incorrect type of paper is being used. Use

 

only paper that meets the specifications

 

required by the printer (see "Selecting print

 

media" on page 24).

 

• There may be debris inside the printer. Open

 

the front cover and remove the debris.

 

• If an original does not feed into the printer, the

 

DADF rubber pad may require to be replaced

 

(see "Replacing the DADF rubber pad" on

 

page 62).

Envelopes skew or

Ensure the paper guides are against both sides of

fail to feed correctly.

the envelopes.

 

 

Troubleshooting 73

Page 73
Image 73
Dell 2145cn manual Solving Other Problems, Paper feeding, Condition Suggested Solutions