
From this You can:
menu:
Recycled
Bond
Letterhead
Preprinted
Colored
Paper
Light
Paper
Heavy
Paper
Custom Type <x> (where x represents
Determine whether
Duplex
Off*
*Factory default setting
Universal Setup
From
this
menu:
Units of Measure
You can:
Specify the height, width, and feed direction of the Universal Paper Size.
Inches* (US)
Millimeters*
Portrait Width
Portrait Height
Set the portrait width of the universal media.
NOTE: If the width exceeds the maximum, then the printer uses the maximum width allowed.
NOTE: 8.5 inches is the US factory default setting. Inches can be increased in
NOTE: 216 mm is the international factory default setting. Millimeters can be increased in
Set the portrait height of the universal media.