From
this
menu:
You can:
NOTE: If the height exceeds the maximum, then the printer uses the
maximum height allowed.
NOTE: 14 inches is the US factory default setting. Inches can be
increased in 0.01-inch increments.
NOTE: 356 mm is the international factory default setting. Millimeters
can be increased in 1-mm increments.
Feed
Direction Specify the feed direction of the Universal Paper Size.
Short Edge*
Long Edge
NOTE: Feed Direction appears only if the longest edge of the media is shorter
than the Maximum Physical Width of the printer.
*Factory default setting
Reports
Mode Mode Main Menu
Reports Menu Settings Page
Device Statistics
Network Setup Page
Profiles List
Print Fonts
Print Directory
Asset Report
From the menu list, use the Arrow buttons to scroll the Reports menu.1.
Press the Select button .2.
Press the Right Arrow button until the heading you want appears on the display, and then press
the Select button .
3.
Use the Arrow buttons to scroll through the available menu items.4.
5.
NOTE: If the height exceeds the maximum, then the printer uses the
maximum height allowed.
NOTE: 14 inches is the US factory default setting. Inches can be
increased in 0.01-inch increments.
NOTE: 356 mm is the international factory default setting. Millimeters
can be increased in 1-mm increments.
Feed
Direction
Specify the feed direction of the Universal Paper Size.
Short Edge*
Long Edge
NOTE: Feed Direction appears only if the longest edge of the media is shorter
than the Maximum Physical Width of the printer.
*Factory default setting
Reports
Mode
Mode Main Menu
Reports
Menu Settings Page
Device Statistics
Network Setup Page
Profiles List
Print Fonts
Print Directory
Asset Report
From the menu list, use the Arrow buttons to scroll the Reports menu.1.
Press the Select button .2.
Press the Right Arrow button until the heading you want appears on the display, and then press
the Select button .
3.
Use the Arrow buttons to scroll through the available menu items.4.
5.