Dell 7500 manual Table B-1. Main Menu Options

Table B-1. Main Menu Options

Option	Function
System Time	Resets the time on the computer’s internal clock.
System Date	Resets the date on the computer’s internal calendar.
Floppy Drive	Identifies the type of diskette drive being used by the
	computer. This option has no user-selectable settings.
Hard Disk	Displays the capacity of the computer's internal hard-disk
	drive. This option does not have any user-selectable settings.
	NOTE: The optional second or third hard-disk drives do not
	appear in this category, even if installed.
Quiet Boot	When set to Enabled (default), prevents the diagnostic
	POST messages and summary screen from appearing at
	system start-up. When set to Disabled, allows POST
	messages and the summary screen to appear at system
	start-up. If Quiet Boot is enabled, you cannot choose a boot
	device as the system initializes.
Video Display	Allows you to specify whether video is visible only on the
Device	computer’s integrated display (LCD Mode), only on an
	external monitor or projector (CRT Mode), or on both the
	display and an external device simultaneously (Simul Mode,
	the default).
	When you are using the Windows 98 operating system
	(rather than the Setup program), press <Fn><F8> to change
	the video display device.
Television Port	When set to Enabled (default), allows the computer to
	display the screen image on a TV (if one is attached to the
	TV-out connector) and disables the LCD and CRT. When set
	to Disabled, allows the screen image to appear on the
	device specified in the Video Display Device option.
Television Type	Allows you to set the the TV-out signal to NTSC (default) or
	PAL.
	Consult your television documentation for information on
	which setting you should use.
System Memory	Displays the base amount of DRAM installed in the
	computer. Each computer has 640 KB of base memory.
	This option has no user-selectable settings.

NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in the

system Help.

support.dell.com Using the Setup Program B-3