b.Push the latch lock to the unlocked position, and slide the latch release in the direction of the arrow shown in Figure 2-2. Keep holding the latch release with one hand while pulling the device out of the media bay with the other.

latch lock

(unlocked position)

bottom of computer

latch

release

optional device

in media bay

Figure 2-2. Removing a Device From the Media Bay

3.Install the new device in the media bay.

Insert the device into the media bay and push the latch lock back into the locked position.

4.Reboot the computer.

Using the MegaBay

The MegaBay, located on the right side of the front of the computer, supports the following devices:

Main battery

Zip drive

Second hard-disk drive

When you receive your computer, the main battery is installed in the MegaBay.

NOTICE: Do not change devices while the computer is connected to a port replicator. The docking connector can be irreparably damaged.

support.dell.com

Options and Upgrades 2-3

Page 33
Image 33
Dell 7500 manual Using the MegaBay, Removing a Device From the Media Bay