Using the System Setup Program: Dell OptiPlex GX1 Low-Profile Managed PC Systems
file:///C|/infodev/2013/eDoc/OpGX1/SQRG/system.htm[2/21/2013 11:52:58 AM]
1. Turn on your system.
If your system is already on, shut it down and then turn it on again.
2. Press <F2> immediately when the F2 = Setup prompt appears in the upper- right corner of the Dell
logo screen.
If you wait too long and your operating system begins to load into memory, let the system complete the load
operation; then shut down the system and try again.
NOTE: To ensure an orderly system shutdown, consult the documentation that accompanied your
operating system.
You can also enter the System Setup program by responding to certain error messages. See "Responding to
Error Messages."
System Setup Screens
The two System Setup screens, Page 1 and Page 2, display the current setup and configuration information
and optional settings for your system. (Typical examples are illustrated in Figure 1.)
Figure 1. System Setup Screens