See Modifying a Card for instructions | Dell GX1 specification

ISA Configuration Utility Messages: Dell OptiPlex GX1 Low-Profile Managed PC Systems

configure PCI device, ID=DeviceID.

Failed to configure Number of Total Count Plug and Play ISA devices. Use your system's configuration utility to resolve conflicts. Press any key to continue.

NOTE: If you do not have documentation listing the allowable resource values, see the corrective action for these messages in the next table entry.

1.Start the ICU.

Any Plug and Play or PCI expansion cards that could not be configured should be marked with config err on the list of cards in the ICU window.

2.Select the System Resources option from the View menu.

The System Resource Usage dialog box displays all resources currently used by the system.

3.Select one of the resources used by your Plug and Play or PCI expansion card, and click Used By Card.

The Card Resources Usage dialog box identifies which device is using the resource.

4.Repeat step 3 until you have identified all conflicting resources and the cards that use them.

5.Modify the cards, as needed, to free the resources required by the unconfigured Plug and Play or PCI expansion card.

See "Modifying a Card" for instructions.

WARNING: Could not configure Plug and Play Card Name.

WARNING: Could not configure PCI device, ID=DeviceID.

Failed to configure Number of Total Count Plug and

The card(s) mentioned are not fully configured due to resource conflicts.

If you do not know the allowable resource values for your Plug and Play or PCI expansion card, use the following procedure to locate and resolve the resource conflict:

1.Remove all card configurations from the ICU.

See "Removing a Card" for instructions.

file:///C/infodev/2013/eDoc/OpGX1/SQRG/isa.htm[2/21/2013 11:53:05 AM]

Image 102

Dell GX1 technical specifications See Modifying a Card for instructions

Contents

Initial release 7 Dec Last revised 31 Jan System Features Overview Hardware Features 640 × True-color 32 bpp 85 Hz 800 × Software Features Manageability Features Dell OpenManage Program Fault Management Auto Power On Wakeup On LAN Temperature Monitoring Security Features Connecting Peripheral Devices O Ports, Connectors, and Indicators USB Connectors Parallel Port ConnectorMouse Connector Integrated NIC Connector Serial Port Connectors Audio ConnectorsVideo Connector Keyboard Connector Using the Power Switch Using the Optional Stand for Vertical Orientation Attaching the Optional Stand for Vertical Orientation Energy Star Compliance Energy Star Emblem Accessing Online Documentation Getting Help Entering the System Setup Program Enter the System Setup program as follows System Setup Screens System Setup ScreensPage System-Setup Navigation Keys Keys Action Using the System Setup ProgramSystem Setup Options Time Date Diskette Drive A, Diskette Drive B, and Use ZIP as a or BDrives Primary and Secondary Reserved Memory Chassis Intrusion CPU SpeedNum Lock DAC Snoop Keyboard Errors System PasswordPassword Status Boot Sequence Device-List Screen Navigation Keys Keys Action Sample Device List Screen Setup Password Power Management Saving Monitor PowerSaving Eide Hard-Disk Drive Power Sound Mouse Parallel Port Parallel ModeSerial Port 1 and Serial Port IDE Hard Disk Speaker Using the System Password FeatureDiskette System Data Options Assigning a System Password Using Your System Password to Secure Your System Type the password and press Enter Using the Setup Password Feature Deleting or Changing an Existing System Password Assigning a Setup Password Page Responding to Error Messages Back to Contents Overview Quick Start About the ICU When to Run the ICU Preparing to Use the ICUICU Database Accessing Help Starting the ICUBacking Up the ICU Diskette Adding a Listed Card Making Selections in the ICUICU Keys Keys Action Add Network Card Dialog Box Configuration Settings Dialog Box for Assigning an IRQ Line Adding an Unlisted Card Specify Interrupt Dialog Box Specify I/O Port Dialog Box Modifying a Card Removing a Card Viewing Resources System Resource Usage Dialog Box Locking and Unlocking Cards Saving the System ConfigurationExiting From the ICU Locking and Unlocking All Resources Locking and Unlocking Configuration Resources Safety First For You and Your Computer Before You Begin Removing the Computer Cover Unpacking Your Hardware Option Replacing the Computer Cover Replacing the Computer Cover Inside Your Computer Computer Orientation View Jumpers System Board Jumpers System-Board Jumper Settings Description BUS66M System Board and Riser Board Labels LPT1 Removing and Replacing the Expansion-Card Cage Removing the Expansion-Card Cage Replacing the Expansion-Card Cage System Board Features Expansion Cards Expansion Cards Expansion Slots Removing the Filler Bracket Removing an Expansion Card Adding Memory DIMMs and Dimm Sockets Performing a Memory Upgrade Installing a Dimm Installing a Dimm Removing a Dimm Adding Video Memory Installing a Video-Memory Upgrade Module Upgrading the Microprocessor Removing the Microprocessor Replacing the System Battery Page System Battery and Battery Socket Drive Locations Removing and Replacing Front-Panel Inserts Removing the Front-Panel Insert for a 5.25-Inch Bay Connecting Drives DC Power Cable Connector Installing a Drive in the 5.25-Inch Drive Bay Removing the 3.5-Inch Diskette Drive/Bracket Assembly Installing the 5.25-Inch Diskette Drive Bracket Attaching Cables to a Drive in the 5.25-Inch Drive Bay Installing an Eide Hard-Disk Drive Eide Drive Addressing Removing the Hard-Disk Drive Bracket Securing the Hard-Disk Drive to the Bracket ALERT! Cover was previously removed Page Installing Scsi Devices Scsi Configuration Guidelines General Procedure for Installing Scsi Devices Page ALERT! Cover was previously removed Partitioning and Formatting Scsi Hard-Disk Drives Microprocessor System InformationExpansion Bus Memory DrivesPorts Video Key Combinations Physical Controls and IndicatorsPower Environmental Back to Contents ICU Error Messages Message Probable Cause Corrective Action Loaded card is not a Conflictingcard This is An Eisa system. Use Configuration Manager Messages MessageProbable Cause Corrective Action Error Failed to activate device, CSN=Card Select Number See Modifying a Card for instructions See Adding a Listed Card for instructions