120 Command Groups

Utility Commands

Auto Config

Captive Portal

Command Description Mode*
boot host auto-save Enables/disables automatically saving the
downloaded configuration on the switch.
GC
boot host dhcp Enables/disables Auto Config on the switch. GC
boot host retry-count Set the number of attempts to download a
configuration.
GC
show boot Displays the current status of the Auto Config
process.
PE
*NOTE: For the meaning of each Mode abbreviation, see "Mode Types" on page 64.
Command Description Mode*
authentication timeout Configures the authentication timeout. CP
captive-portal Enables the captive portal configuration mode. GC
http port Configures an additional HTTP port for captive
portal to monitor.
CP
https port Configures an additional HTTPS port for
captive portal to monitor.
CP
show captive-portal Displays the status of captive portal. PE
show captive-portal status Reports the status of all captive portal instances
in the system.
PE
block Blocks all traffic for a captive portal
configuration.
CPI
configuration Enables the captive portal instance mode. CP
enable Globally enables captive portal. CPI
group Configures the group number for a captive
portal configuration.
CPI